Angular Contact Ball Bearings
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load.
single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

- NTN 6204lu Bearing
- 4.61 kg
- 68.7 mm


- 7.5 Inch | 190.5 Millimeter x 8.25 Inch | 209.55 Millimeter x 0.5 Inch | 12.7 Millimeter CONSOLIDATED BEARING KU-75 XPO-2RS Angular Contact Ball Bearings
- 108 mm
- 7.5 Inch | 190.5 Millimeter x 8.25 Inch | 209.55 Millimeter x 0.5 Inch | 12.7 Millimeter

- 7 Inch | 177.8 Millimeter x 7.75 Inch | 196.85 Millimeter x 0.5 Inch | 12.7 Millimeter CONSOLIDATED BEARING KU-70 XPO-2RS Angular Contact Ball Bearings
- 7 Inch | 177.8 Millimeter x 7.75 Inch | 196.85 Millimeter x 0.5 Inch | 12.7 Millimeter
- 1 mm

- 5 Inch | 127 Millimeter x 5.75 Inch | 146.05 Millimeter x 0.5 Inch | 12.7 Millimeter CONSOLIDATED BEARING KU-50 XPO-2RS Angular Contact Ball Bearings
- 1,86 kN
- 5 Inch | 127 Millimeter x 5.75 Inch | 146.05 Millimeter x 0.5 Inch | 12.7 Millimeter